Description
-
Industry-leading 3-YEAR WARRANTY (a $499 value!)
-
Combo (symmetrical and asymmetrical) Arm Assembly with Adjustable Screw Pads!
-
CE Certified Lift Structure and Hydraulic System – Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity
-
One Set of 4″ Tall Truck Adapters Included; 6’9″ Lift Height Maximum with Truck Adapters
-
All Robot Welded Structure with Durable Powder Coated Finish
APlusLift HW-10KOH-A car lift (auto hoist) is one of the most affordable overhead car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity. We also have an HW-10ASY 10000LB overhead car lift with a single-point release.
We are proud to offer an industry-leading 3-year warranty for all parts (a $499 value)! We have all replacement and optional parts available for our lifts. We welcome suggestions to improve our products and service!
Free shipping to the lower 48 states with forklift (or similar) on-site, or free pickup at nearby terminal. Car lifts require an on-site forklift (no liftgate). We strongly recommend against renting a forklift; expenses are not reimbursed. See the shipping policy below for limited access/remote/high-cost areas.
Specifications |
|||||||||
| Model | HW-10KOH-A (This Model) |
HW-10ASY (for Comparison) |
|||||||
| Manual | HW-10KOH-A Manual | HW-10ASY Manual | |||||||
| Style | Overhead | Overhead | |||||||
| Lock Release | Double Point Release | Single Point Release | |||||||
| Warranty | 3 Years (36 months) | 3 Years (36 months) | |||||||
| Lifting Capacity | 10,000 LB | 10,000 LB | |||||||
| Overall Height | 143 3/16″ | 143 3/16″ | |||||||
| Overall Width | 134 5/16″ | 139 1/8″ (standard) 140 15/32″ (post rotated) |
|||||||
| Maximum Lift height with Truck Adapters | 81″ | 81″ | |||||||
| Maximum Lift height without Truck Adapters | 75″ | 75″ | |||||||
| Maximum lift height from bottom of the arm to the ground | 71″ | 71″ | |||||||
| Minimum Height of Adjustable Pads from Ground | 4″ | 4″ | |||||||
| Drive Through Width (Carriage to Carriage) | 100″ | 104″ (symmetric) 97″ (asymmetric) |
|||||||
| Column to Column Width | 109″ | 113″ (symmetric) 107″ (asymmetric) |
|||||||
| Column Cross Section | 11″L x 7″W | 11″L x 7″W | |||||||
| Driving Mode | Dual hydraulic cylinders, chain drive | Dual hydraulic cylinders, chain drive | |||||||
| Motor | 220V Single Phase 3HP 10A (recommend a 30A breaker) | 220V Single Phase 3HP 10A (recommend a 30A breaker) | |||||||
| Hydraulic Oil | 3-5 gallons AW32/AW46 (not included) | 3-5 gallons AW32/AW46 (not included) | |||||||
| Time to full rise | 50 seconds | 50 seconds | |||||||
| Shipping Weight | 1470 LB | 1470 LB and 120 LB | |||||||
| Shipping package size | 113″L x 22″W x 40″ H |
|
|||||||
| Concrete Requirement | 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below) | ||||||||
| Parts Included |
|
||||||||
| Optional Parts | 2 3/4″ and 6″ Tall Truck Adapters | ||||||||
| Arm Assembly | Combo (symmetrical and asymmetrical) Arm Assembly | ||||||||
| Front Arms | Straight Front 3 Stage reach from 22 7/8″ to 42 5/8″ | ||||||||
| Back Arms | Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″ | ||||||||
| Column Steel Thickness | 13/64″ | ||||||||
| Carriage Steel Thickness | 15/64″ | ||||||||
| Carriage Yoke Thickness | 9/16″ | ||||||||
| Arm Steel Thickness | 15/64″ | ||||||||
| Base Plate Steel Thickness | 5/8″ | ||||||||
| Model | HW-10KOH-A (This Model) |
HW-10ASY (for Comparison) |
|||||||
Features
- CE Certified Lift Structure and Hydraulic System
- Third-party tested with a dynamic load capacity of 115%
- Third-party tested with a static load capacity of 150%
- Durable hydraulic system
- Easy to operate and maintain
- Double-point safety lock release
- Double seal rings protecting PU material
- Carriage material Q355 (ASTM A572), stronger than normal Q235 steel
- Lifting operation by pressing the “UP” button on the motor
- Manual lowering operation by pressing the lever
- Relief valve built-in power pump to prevent overloading
- Automatic arm lock restraints
- Relief valve built-in power pump to prevent overloading
- Door guard protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
- Ultra-high molecular self-lubricating nylon slider that ensures carriage smooth moving up and down
WHAT OUR CUSTOMERS SAY
Real reviews from verified customers who trust our products
TRUSTED BY
PROFESSIONALS
WORLDWIDE
⭐ ⭐ ⭐ ⭐ ⭐
4.8 average
760 verified reviews
⭐ ⭐ ⭐ ⭐ ⭐
March 15, 2025
The BendPak XPR-10AS 10,000 lb Two-Post Lift has been a game-changer for my shop. Installation was straightforward and it handles heavy trucks with ease.
Michael Rodriguez
Phoenix, AZ
✔ Verified Purchase
⭐ ⭐ ⭐ ⭐ ⭐
February 28, 2025
Excellent experience with Carliftexperts.shop — the lift arrived quickly, and their customer service was helpful and professional.
James Thompson
Dallas, TX
✔ Verified Purchase
⭐ ⭐ ⭐ ⭐ ⭐
January 12, 2025
Perfect fit for my home garage. The Atlas Garage Pro 8000 is compact but handles my F-150 perfectly. Great product!
Robert Chen
Seattle, WA
✔ Verified Purchase
⭐ ⭐ ⭐ ⭐ ⭐
September 12, 2025
I installed the Triumph NT-9FP 9,000 lb 2-Post Car Lift in my garage, and it completely changed how I work on cars.
David Harper
Chicago, IL
✔ Verified Purchase
