Description
-
Industry leading 3 YEAR WARRANTY (a $499 value!)
-
Single Point Safety Lock Release System
-
Two Set of 2 3/4″ Tall and 5 1/2″ Tall Truck Adapters Included; 6’7″ Lift Height Maximum with Truck Adapters
-
CE Certified Lift Structure and Hydraulic System – Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity
-
All Robot Welded Structure with Durable Powder Coated Finish
APlusLift AP-14SR is a 14,000LB single point release overhead car lift (auto hoist) built with quality materials and good workmanship.
We are proud to offer an industry leading 3 year warranty for all parts (a $499 value)! We have all replacement and optional parts available for our lifts.
Free shipping to a commercial address (in a business zone) with forklift or a nearby freight terminal in the lower 48 states. Residential address has $60 additional charge. No liftgate service as the car lift package is too long. Please prepare your own unloading equipment such as a forklift, bobcat, cherrypicker, or flatbed truck to unload (We strongly recommend NOT to rent a forklift). Additional freight charges may apply for remote areas and high cost delivery areas.
Specifications |
|||||||||
| Model | AP-14SR (This Model) |
HW-12HD (for Comparison) |
|||||||
| Manual | AP-14SR Manual | HW-12HD Manual | |||||||
| Style | Overhead | Overhead | |||||||
| Lock Release | Single Point Release | Single Point Release | |||||||
| Warranty | 3 Years (36 Months) | 3 Years (36 Months) | |||||||
| Lifting Capacity | 14,000 LB | 12,000 LB | |||||||
| Overall Height | 165 11/32″ | 160″ | |||||||
| Overall Width | 142 1/8″ | 137 13/32″ | |||||||
| Maximum Lift height with Truck Adapters | 79 19/32″ | 77 15/16″ | |||||||
| Maximum Lift height without Truck Adapters | 74 3/32″ | 72 7/16″ | |||||||
| Minimum Height of Adjustable Pads from Ground | 6 11/16″ | 5 1/8″ | |||||||
| Drive Through Width (Carriage to Carriage) | 104 1/8″ | 99 23/32″ | |||||||
| Column to Column Width | 114 11/16″ | 110 1/32″ | |||||||
| Column Cross Section | 12 7/32″L x 9 27/32″W | 12 7/32″L x 9 27/32″W | |||||||
| Driving Mode | Dual hydraulic cylinders, direct drive | Dual hydraulic cylinders, direct drive | |||||||
| Motor | 220V Single Phase 3HP (recommend a 30A breaker) | 220V Single Phase 3HP (recommend a 30A breaker) | |||||||
| Hydraulic Oil | 3.2-5 gallons AW32/AW46 (Not Included) | 3.2-5 gallons AW32/AW46 (Not Included) | |||||||
| Time to full rise | 75 seconds | 75 seconds | |||||||
| Shipping Weight | 2300 LB | 2100LB | |||||||
| Shipping package size | 150″L x 33″W x 21″H | 145 11/16″L x 32 11/16″W x21 1/4″H | |||||||
| Arm Assembly | Symmetrical Arm Assembly | Symmetrical Arm Assembly | |||||||
| Front Arms | Straight Front 2 stages reach from 32 5/32″ to 49 7/32″ | 2 stages reach from 32 5/32″ to 49 7/32″ | |||||||
| Back Arms | Straight Rear 2 stages reach from 32 5/32″ to 49 7/32″ | 2 stages reach from 32 5/32″ to 49 7/32″ | |||||||
| Column Steel Thickness | 1/4″ | 1/4″ | |||||||
| Carriage Steel Thickness | 1/4″ | 1/4″ | |||||||
| Carriage Yoke Thickness | 13/32″ | 13/32″ | |||||||
| Arm Steel Thickness | 5/16″ | 5/16″ | |||||||
| Base Plate Steel Thickness | 5/8″ | 5/8″ | |||||||
| Truck Adapters (Height Extensions) | Two Sets: 4pcs: 5 1/2″ Tall 4pcs: 2 3/4″ Tall |
Two Sets: 4pcs: 5 1/2″ Tall 4pcs: 2 3/4″ Tall |
|||||||
| Other Parts Included |
|
||||||||
| Optional Parts | 2 3/4″ and 6″ Tall Truck Adapters | ||||||||
| Concrete Requirement | 6″ thick at 3500 psi reinforced with fiberglass or steel | 6″ thick at 3500 psi reinforced with fiberglass or steel | |||||||
| Model | AP-14SR (This Model) |
HW-12HD (for Comparison) |
|||||||
Features
- Direct drive mode
- Durable hydraulic system
- Easy to operate and maintain
- Single point safety lock release
- Double Seal Rings Protecting PU Material
- Carriage and Column Material Q235B Steel
- Lifting operation by pressing “UP” button on motor
- Manual lowering operation by pressing lever
- Relief valve built in power pump to prevent overloading
- Automatic arm lock restraints
- Relief valve built in power pump to prevent overloading
- Door guards protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 3/8″ diameter cable and 3″ pulley that reduce high stress on synchronization process and increase cable life
- Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
WHAT OUR CUSTOMERS SAY
Real reviews from verified customers who trust our products
TRUSTED BY
PROFESSIONALS
WORLDWIDE
⭐ ⭐ ⭐ ⭐ ⭐
4.8 average
760 verified reviews
⭐ ⭐ ⭐ ⭐ ⭐
March 15, 2025
The BendPak XPR-10AS 10,000 lb Two-Post Lift has been a game-changer for my shop. Installation was straightforward and it handles heavy trucks with ease.
Michael Rodriguez
Phoenix, AZ
✔ Verified Purchase
⭐ ⭐ ⭐ ⭐ ⭐
February 28, 2025
Excellent experience with Carliftexperts.shop — the lift arrived quickly, and their customer service was helpful and professional.
James Thompson
Dallas, TX
✔ Verified Purchase
⭐ ⭐ ⭐ ⭐ ⭐
January 12, 2025
Perfect fit for my home garage. The Atlas Garage Pro 8000 is compact but handles my F-150 perfectly. Great product!
Robert Chen
Seattle, WA
✔ Verified Purchase
⭐ ⭐ ⭐ ⭐ ⭐
September 12, 2025
I installed the Triumph NT-9FP 9,000 lb 2-Post Car Lift in my garage, and it completely changed how I work on cars.
David Harper
Chicago, IL
✔ Verified Purchase
